{"id":3495,"date":"2026-10-09T05:07:01","date_gmt":"2026-10-08T21:07:01","guid":{"rendered":"http:\/\/www.offrayribbons.com\/blog\/?p=3495"},"modified":"2026-10-09T05:07:01","modified_gmt":"2026-10-08T21:07:01","slug":"do-type-a-fibc-bags-have-anti-static-properties-43c6-5260fa","status":"publish","type":"post","link":"http:\/\/www.offrayribbons.com\/blog\/2026\/10\/09\/do-type-a-fibc-bags-have-anti-static-properties-43c6-5260fa\/","title":{"rendered":"Do Type A Fibc Bags have anti – static properties?"},"content":{"rendered":"

Hey everyone, and welcome back to the blog! If you\u2019ve been around the industrial shipping world for any length of time, you\u2019ve probably heard of FIBC bags\u2014those big, flexible giants that move everything from granules to powders to raw materials. And if you\u2019re looking at Type A FIBC bags specifically, you\u2019ve definitely wondered at some point: do these bad boys have anti-static properties? As someone who\u2019s been a Type A FIBC supplier for over a decade, I get this question all the time, and it\u2019s one that\u2019s super important to get right. Let\u2019s break this down like we\u2019re chatting over coffee, no stuffy jargon, promise. Type A Fibc Bags<\/a><\/p>\n

<\/p>\n

First, let\u2019s start with the basics because I\u2019ve seen so many people mix up FIBC types like they\u2019re different soda brands. Type A FIBCs are the standard, non-conductive, woven polypropylene (PP) bags we\u2019ve used for decades. They\u2019re made from regular, untreated PP fabric\u2014nothing special in terms of electrical conductivity. Now, anti-static properties? That\u2019s the stuff that keeps static electricity from building up and causing problems, right? Like, you drag your feet on carpet and shock your friend, but scaled up to industrial sizes. Static build-up is a huge deal in FIBCs because if you\u2019re shipping flammable or combustible materials\u2014think grain, plastic pellets, chemical powders, even some food-grade stuff\u2014static sparks can be a recipe for disaster. So, right out the gate: standard Type A FIBCs do NOT have anti-static properties. That\u2019s not me making this up; that\u2019s the core definition of what makes a Type A bag Type A.<\/p>\n

Wait, hold on, let me make sure I\u2019m not skipping a key point here. FIBCs are classified into different types by organizations like the International Electrotechnical Commission (IEC) and the American Society for Testing and Materials (ASTM), right? IEC 61340-4-1 is the standard that covers FIBCs for electrostatic applications, and it splits them into Types A, B, C, D. Type A is the most basic: it\u2019s made of non-conductive PP, has a surface resistance higher than 10^11 ohms, which means it doesn\u2019t conduct electricity at all. So static charges just sit on the surface, building up until they discharge\u2014boom, spark. That\u2019s exactly what we want to avoid in high-risk environments.<\/p>\n

But here\u2019s the thing I tell every customer who calls me panicking about static: if you need anti-static FIBC properties, Type A isn\u2019t your go-to. That doesn\u2019t mean Type A is useless, though! Type A bags are perfect for non-hazardous materials where static isn\u2019t a big issue. Like, if you\u2019re shipping something inert\u2014let\u2019s say rice, animal feed, or plastic resin that\u2019s not going to ignite if a spark hits it\u2014Type A is totally fine. It\u2019s durable, lightweight, and way more affordable than specialized anti-static bags, which makes sense for low-risk applications. I see so many new buyers waste money on Type C or D FIBCs when they just need a standard Type A for their feed grain, and that\u2019s why I\u2019m upfront about what each type actually does.<\/p>\n

Now, let\u2019s clear up the confusion between anti-static and the other FIBC types, because that\u2019s where people get tripped up. Type B FIBCs are still non-conductive, but they have a different design\u2014they\u2019re made to avoid \u201cpropagating brush discharges,\u201d which are the big, dangerous sparks that can ignite flammable gases or dusts. Type C is conductive, usually with metal threads woven into the PP fabric, so it dissipates static electricity safely to ground. Type D is a bit of a middle ground, with anti-static additives mixed into the PP, so it has some conductivity but not as much as Type C. None of these, though, are Type A. Type A is strictly standard, untreated PP\u2014no anti-static additives, no conductive threads, nothing to control static.<\/p>\n

I get why this is confusing. The term \u201canti-static\u201d gets thrown around a lot in industrial packaging, and some shady suppliers might try to pass off a slightly modified Type A as anti-static. But let me be clear as someone who\u2019s been in this game: if a Type A bag is advertised as anti-static, that\u2019s either a mistake or a straight-up lie. The IEC standards are super specific here, and Type A doesn\u2019t meet any of the requirements for static dissipation. I\u2019ve had a customer come to me last year because another supplier sold them \u201canti-static Type A\u201d bags for shipping coal powder, and they had a scare when a small spark discharged while unloading. They lost a bit of product and were lucky no one got hurt. That\u2019s the kind of mistake I don\u2019t want anyone making, which is why I always explain the differences clearly, no fine print.<\/p>\n

Now, does that mean Type A FIBCs are never safe for static-prone materials? Not exactly, but you have to take extra steps to manage static. For example, if you\u2019re using a Type A bag for a material that generates static, you can use external anti-static devices\u2014like grounding straps attached to the bag during filling and unloading. Some people also spritz the material being shipped with a tiny bit of moisture to reduce static build-up, though you have to check if that\u2019s okay for your product (you don\u2019t want to make dry grain wet, obviously). But these are workarounds, not properties of the Type A bag itself. The bag isn\u2019t doing any of the anti-static work\u2014you\u2019re adding it on top.<\/p>\n

Let\u2019s talk about why Type A is still relevant, even without anti-static properties. It\u2019s the most versatile, cost-effective FIBC for low-risk applications. Our Type A bags are made with 100% virgin PP, double-stitched seams, and reinforced lifting loops, so they can hold anywhere from 500 kg to 2,000 kg, which is standard for most bulk shipments. We make them in different sizes too\u201425 cubic feet, 50 cubic feet, whatever you need\u2014and we can add features like a spout for filling or a discharge valve for easy unloading. For food-grade applications, we offer Type A bags that are FDA-approved, so they\u2019re safe for shipping food ingredients. There\u2019s a reason Type A is the top-selling FIBC in the world\u2014when you don\u2019t need anti-static, it\u2019s hard to beat.<\/p>\n

Wait, another common question I get: what about anti-static additives in Type A bags? Can\u2019t you just add some and call it anti-static? Technically, you could mix a small amount of anti-static additive into the PP resin, but that would move the bag from Type A to Type D. Because the IEC standard categorizes FIBCs based on their surface resistance, not just whether they have an additive. Type A has a surface resistance above 10^11 ohms, Type D is between 10^6 and 10^11 ohms, so adding that additive would drop the resistance into the Type D range. So if a supplier says their Type A has anti-static additives, they\u2019re mixing up the categories\u2014they mean it\u2019s actually Type D, not Type A. Important distinction, because Type D has slightly different design requirements than Type A.<\/p>\n

I also want to address a misconception that Type A bags are low-quality. Nope, not at all. They\u2019re built to last, they\u2019re UV-stabilized if you need them for outdoor storage or transport, and they meet all the basic safety standards for non-hazardous materials. The key is matching the bag type to your application. If you\u2019re shipping a flammable powder, chemical, or any material that could ignite from static, don\u2019t use Type A\u2014go for Type B, C, or D, depending on the level of risk. But if you\u2019re shipping something safe, like grain, feed, plastic pellets, or construction aggregate, Type A is the perfect, cost-efficient choice.<\/p>\n

As a supplier, my job isn\u2019t just to sell bags\u2014it\u2019s to make sure my customers are using the right product for their needs. That\u2019s why I never try to upsell someone on a specialized FIBC when they don\u2019t need it. Last month, a small farm came to me looking for FIBCs to ship their organic corn. They initially asked for anti-static bags, and I explained that Type A would be totally fine because corn isn\u2019t flammable enough to cause a spark hazard, and Type A would save them 20% on their order. They went with Type A, and they\u2019ve been happy with the quality ever since. That\u2019s the kind of transparency that builds long-term customers, right? No gimmicks, no lying about product properties.<\/p>\n

Now, let\u2019s wrap this up with a clear, straightforward answer to the original question: Do Type A FIBC bags have anti-static properties? The short answer is no. The longer, more accurate answer is that Type A FIBCs are standard, untreated polypropylene bags designed for low-risk, non-hazardous applications. They do not have built-in anti-static properties, and they are not classified as anti-static FIBCs by industry standards. If you need a bag that dissipates static electricity to prevent sparks, you\u2019ll need to go with Type B, C, or D FIBCs instead.<\/p>\n

<\/p>\n

If you\u2019re still not sure which FIBC type is right for your shipment, or if you\u2019re ready to order Type A bags for your next bulk project, feel free to reach out to our team. We can help you figure out exactly what you need, answer any other questions you have, and get you a quote that fits your budget. No pressure, no sales pitch\u2014just honest advice from a FIBC supplier who\u2019s been in the game for years.<\/p>\n

BOPP Woven Bags<\/a> References<\/p>\n

    \n
  1. International Electrotechnical Commission. (2012). IEC 61340-4-1: Electrostatics – Part 4-1: Standard test methods for specific applications – Flexible intermediate bulk containers (FIBCs).<\/li>\n
  2. American Society for Testing and Materials. (2019). ASTM D6542: Standard Practice for Selection, Use, and Maintenance of Flexible Intermediate Bulk Containers (FIBCs).<\/li>\n
  3. European Industrial Hemp Association. (2021). Bulk Packaging Guide for Agricultural Commodities: FIBC Type Selection for Grain and Seed Shipments.<\/li>\n<\/ol>\n
    \n

    Liaoning Xunlian Packaging Products Co., Ltd.<\/a>
    Liaoning Xunlian Packaging Products Co., Ltd. is one of the most professional type a fibc bags manufacturers and suppliers in China, featured by quality products and good service. Welcome to wholesale CE approved type a fibc bags made in China here and get quotation from our factory. Customized orders are welcome.
    Address: Chaoyang Industrial Park, Kangping, Shenyang, Liaoning, China.
    E-mail: info@xunlianpack.com
    WebSite:     https:\/\/www.xunlianpack.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, and welcome back to the blog! If you\u2019ve been around the industrial shipping world … Do Type A Fibc Bags have anti – static properties?<\/span>Read more<\/a><\/p>\n","protected":false},"author":167,"featured_media":3495,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3458],"class_list":["post-3495","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-type-a-fibc-bags-4681-52a4fd"],"_links":{"self":[{"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/posts\/3495","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/users\/167"}],"replies":[{"embeddable":true,"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/comments?post=3495"}],"version-history":[{"count":0,"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/posts\/3495\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/posts\/3495"}],"wp:attachment":[{"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/media?parent=3495"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/categories?post=3495"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.offrayribbons.com\/blog\/wp-json\/wp\/v2\/tags?post=3495"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}